Dean Resources QC Tech - Nights - Oakland, OR

Position Title : Quality Control Technician

Reports To : Quality Lead and Plant Manager

Department : Dean Resources Pellet Mill

Hours per shift : Employee works 12-hour shifts, with two 10-minute breaks, and 30-minute unpaid lunch.

Wage : Level 4 / 5 (Level 5 after WWPA grade certification)

Position Purpose : Maximize product quality through consistent and accurate machine and product testing. Works closely with production supervisor, maintenance, other Quality Control personnel, and operators. Always complies with safety regulations and other company policies.  Ensures our core values are consistently demonstrated in the way we conduct our operations and interact with each other.

Position Functions :

Quality Control Technician : Essential Functions

These duties are designated as ADA Essential Functions and must be performed in this job.

Identify product quality and manufacturing issues. Investigates causes for these issues, makes recommendations, implement solutions.  Responsible for QC testing documentation and accuracy throughout the mill.

Familiar with the operation of all machinery and how each machine can impact product quality.

Fill out detailed data forms and enter data into computer.

Performs analysis and variance studies, both established and new ones that will benefit operations.

Raise quality awareness through training sessions. Explain issue of value versus quantity, and advocate quality standards with co-workers.

Maintains and encourages high levels of communication between operators, supervisors, and maintenance.

Act as a relief to any positions in the plant for breaks, etc.

Non-Essential Functions

These duties are secondary in nature and are not classified as ADA essential.

The worker may be required to rotate to different positions for cross training purposes or to facilitate production. Job duties for other positions are outlined in their individual job descriptions. Assist Co-Workers or maintenance personnel in basic maintenance and upkeep of machine.

Working Environment : (1) Inside 80%, average temperature 70 degrees F (2) Outside 20%; extreme low temperature 10 degrees F, extreme high temperature 105 degrees F.  Noise or vibration :    Machine noise to include machine being operated as well as other machines close by including Front end loader and forklift. Hazards : See Job Hazard Analysis. (3)  Atmospheric conditions :   Fumes : Wood, Dust : Limited, Mist : Water, Odors : Wood particle, Gasses : None, Poor Ventilation : None

Personal Protective Equipment Required : (1) Eye Protection. (2) Hearing Protection.  (3) Blue Atlas gloves. (4) Approved Footwear (5) High Visibility Clothing.

Physical Demands :   See the attached Job / Task Evaluation and Physical Capabilities portion; this position requires constant use of hearing and vision, frequent pushing / pulling and reaching, and occasional lifting / carrying / more than 50 lbs.

Skills : Use vision / hearing continuously. Reading and speech required to communicate comprehension of Job Hazard Analysis, machine specific lockout procedures, monthly safety training, etc.  Worker generally works alone with little supervision.  Must be self-directed in identifying and efficiently completing each task. Ability to prioritize, organize and make necessary decisions.

Safety : (1) Do only maintenance you are trained to do and keep all body parts out of machinery. (2) Always use our 14-step lockout / tagout procedure before doing any maintenance, clearing jams, or getting into machinery for any reason; be aware of stored energy. (3) Always use proper body mechanics (ex : don’t overreach, get help as needed to push loads out). (4) Use proper PPE (gloves, eye protection, hearing protection).  (5) Be aware of and always communicate with your co-worker (ex : forklift driver). (6) Will be required to read and write during safety training.

ENDURANCE

Never / Not Required

Seldom

1-5%

Occasionally

6-33%

Frequently

34-66%

Continuous

67-100%

Total hours at one time

Total hours in a workday

SITTING

12

STANDING

12

WALKING

12

CHANGE POSITIONS

PHYSICAL REQUIREMENTS : (Enter actual maximum weight in pounds in the box)

LIFTING

Never / Not Required

Seldom

1-5%

Occasionally

6-33%

Frequently

34-66%

Continuous

67-100%

1-10 LBS

10 LBS

11-20 LBS

20 LBS

21-50 LBS

50 LBS

51-75 LBS

75 LBS

76-100 LBS

100 LBS

100 LBS

100 LBS

Maximum weight lifted by worker without assistance : 50 LBS

If required, lifting over 50 LBS is performed with two or more people and / or lifting devices.

CARRYING

Never / Not Required

Seldom

1-5%

Occasionally

6-33%

Frequently

34-66%

Continuous

67-100%

1-10 LBS

10 LBS

11-20 LBS

20 LBS

21-50 LBS

50 LBS

51-75 LBS

75 LBS

76-100 LBS

100 LBS

100 LBS

100 LBS

Maximum weight carried by worker without assistance : 10-50 LBS

If required, carrying over 50 LBS is performed with two or more people and / or lifting devices.

PUSHING / PULLING FORCE TO BE EXCERTED

Never / Not Required

Seldom

1-5%

Occasionally

6-33%

Frequently

34-66%

Continuous

67-100%

1-10 LBS

10 LBS

11-20 LBS

20 LBS

21-50 LBS

50 LBS

51-75 LBS

75 LBS

76-100 LBS

100 LBS