Technical Analysis Inspector Heavy Equipment

Main Duties & Responsibilities

Primary Job Role

Conducts all assigned work in a safe manner adhering to all applicable safety environmental and contamination control policies procedures and regulations. Wears proper personal protective equipment.

Attends and successfully completes required technician training classes. Maintains high awareness of applicable technical changes in the industry. Maintains necessary set of tools required for job performance to conduct inspections ensuring machines are returned to manufacturers specifications.

Perform thorough incoming and outgoing inspections of machines via web based portal with focus on understanding of product problems by reviewing PIP & PSP SOS and Vision Link History prior to machine inspection downloading

Product Status Report from ECM using ET downloading Autolube System (if installed) and pulling SOS Samples

Completes required documentation including inspection reports SOMA reports component rebuild intervals and preventative maintenance vs manufacturers scheduled intervals utilizing appropriate software.

Works in a neat and orderly fashion constantly looking for ways of improving the methods of work work area and safety standards. Assists with maintaining proper facility appearance and shop conditions by following proper contamination control guidelines including housekeeping and performing other general maintenance duties.

Monitors job expenses versus repair estimates and ensures that the supervisor is aware of any cost over run prior to the job being completed.

Approaches work in a positive manner maintains conduct that is supportive of the work Team and sets the standard for others to follow. Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations. Trains and / or mentors others in department. Assumes Supervisors positon temporarily as necessary.

Performs other duties as assigned.

Essential Job Competencies

Safety : fully supports encourages and follows safe work behavior and considers safety of paramount importance in the workplace.

Job Specific Skills : Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources. Demonstrates the effective application of the job specific knowledge skills and ability required to resolve job related challenges in the workplace. Refer to job specific training requirements for the job identified in the LMS.

Communication : Uses active listening skills conveying information with the appropriate medium that is clear and easily understood. Uses feedback to verify effective and accurate communication has occurred. Ensures that others having a need to know are kept informed about developments progress problems and plans through consistent effective communication. Avoids surprises.

Information Gathering : Checks all appropriate sources in identifying the information needed for analysis and decision making. Uses skillful methods in obtaining high quality relevant information. Checks work to ensure accuracy and completeness. Compares observations or finished work to what is expected to find inconsistencies. Clearly documents sources and organizes the information according to the research needs.

Takes Initiative : Takes appropriate action to resolve issues without requiring direction. Seeks out others involved in a situation to learn their perspectives. Makes difficult decisions in a timely manner. Is willing to make decisions in difficult or ambiguous situations when time is critical. Assertive in a group when it is necessary to facilitate change overcome an impasse face issues or ensure that decisions are made.

Results Oriented : Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations. Remains focused does not get bogged down in unnecessary detail. Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events. Driven maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work.

Adaptability : Adapts to changing business needs conditions and work responsibilities. Adapts approach goals and methods to achieve solutions and results in dynamic situations. Recovers quickly from setbacks and finds alternative ways to reach goals or targets. Open to different and new ways of doing things; willing to modify ones preferred way of doing things.

Credibility : Demonstrated concern to be responsible reliable and trustworthy. Maintains commitments. Respects the confidentiality of information or concerns shared by others. Is honest and forthright with people. Takes personal responsibility for the quality and timeliness of work. Punctual follows instructions policies and procedures.

Personal Development : Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas. Obtains developmental opportunities proactively. Actively seeks and embraces growth opportunities.

Company Overview

In 1962 Ring Power Corporation became a full-line Caterpillar dealer in North Florida and later expanded its authorized territory to include Central Florida.

Today Ring Power Corporate headquarters in St. Augustine oversees the operations of 18 branch locations throughout the state of Florida including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano. Ring Power also has eight facilities outside of Florida - The Carolinas Georgia Texas & Tennessee- to serve the needs of other specialized industries and customers.

Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer order to preserve the Customers First reputation that Ring Power was built on we continually train our employees and work closely with our customers to assure complete satisfaction especially after the sale.

Currently more than 2300 employees at 20 locations throughout Florida and the United States work hard to provide the highest quality construction equipment backed by responsive professional service and support at every level.

Qualifications

Education and Experience

Formal Education High School diploma or GED

Experience 5-6 years

Required / Credentials

Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers.

Completed required training curriculum to be designated a Technical Analysis Inspector.

Moderate level capability in the use of a computer Microsoft Office products and relevant Dealer software programs.

Not Required but Highly Desired Criteria

Proficient in the use of a computer Microsoft Office products and relevant Dealer software programs.

Successfully completed relevant specialized equipment technical courses.

Updating of Knowledge

Job requirements change requiring re-training to stay current every 1-2 years.

Responsibility for Change Innovation Overall Improvement and / or Effectiveness

Problem Solving Job requires basic problem solving ability using established examples / guidance.

Creativity Job requires some creativity to generate solutions or improve effectiveness within well-established boundaries.

Autonomy Job is not normally monitored but overall objectives are clearly defined. Use of discretion in how the work is done setting priorities and decision making is encouraged. More emphasis is placed on achieving the desired outcome not on controlling the process.

Working Environment

Stress Load Constant exposure to these stresses (more than 80% of the time).

Workload Fluctuation Job frequently involves changes in priorities complexity and / or quantity of work.

Work Schedule Work is typically performed after regular business hours with occasional requirements to work days holidays and weekends.

Organizational Impact

A persons performance in this job has considerable immediate impact on expense efficiencies or achievement of overall department objectives.

Supervisory Responsibility

Job has no subordinates / no supervisory responsibility (may work independently or as a member of a team)

Physical Demands

NA : Not Applicable

O : Occasionally - (up to 3 hours / day)

F : Frequently - (3-6 hours / day)

C : Constantly - (6-8 hours / day)

F : Climbing

O : Balancing

O : Stooping

F : Kneeling

F : Crouching

F : Crawling

F : Reaching

C : Standing

F : Sitting

F : Walking

O : Feeling

F : Fingering

F : Grasping

F : Repetitive Motion

C : Talking

C : Hearing

F : Pushing - Up to 25 lbs.

F : Pulling - Up to 25 lbs.

F : Lifting - Up to 25 lbs.

O : Pushing - 26-50 lbs

O : Pulling - 26-50 lbs.

O : Lifting - 26-50 lbs.

O : Pushing - Over 50 lbs.

O : Pulling - Over 50 lbs.

O : Lifting - Over 50 lbs.

Environmental Conditions

NA : Not Applicable

O : Occasionally - (up to 3 hours / day)

F : Frequently - (3-6 hours / day)

C : Constantly - (6-8 hours / day)

C : Inside conditions : Protection from weather but not necessarily from temperature change.

O : Outside environmental conditions : No effective protection from weather.

O : Extreme cold : Temperatures below 32 degrees for periods of more than one hour.

F : Extreme heat : Temperatures above 100 degrees for periods of more than one hour.

F : Noise : sufficient noise to cause the worker to shout to be heard above the ambient noise level

F : Vibration : Exposure to oscillating movements of the extremities of whole body.

F : Hazards : Includes a variety of physical conditions (i.e. proximity to moving mechanical parts electrical current working in high places exposure to heat and / or chemicals.

F : Atmospheric conditions : One or more of the following conditions that affect the respiratory system or the skin : Fumes odors dust mists gases or poor ventilation.

F : Oils : There is air and / or skin exposure to oils and other cutting fluids.

O : Air particulates / contaminants : the worker is required to wear respirator.

RING POWER CORPORATION INC. IS AN EQUAL OPPORTUNITY EMPLOYER

Key Skills

New Equipment,Equipment Performance,Parts Inventory,personal protective,Semiconductor,Project Management,Process Control,Equipment Design,Equipment Issues,Equipments inspection,Mechanical Equipment,Maintenance Activities,Visual Inspections,Data Analysis,Air Compressors

Employment Type : Unclear

Experience : years

Vacancy : 1