Quality Inspector A

Job Description

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at [email protected]

\n

• Notice : Know Your Rights : Workplace Discrimination is Illegal

\n

Notice : Pay Transparency Nondiscrimination (English)

\n

Aviso : Transparencia en el Pago No Discriminacion (Spanish)

\n \n

Job Description :

Job Summary : The Quality Inspector A is responsible to ensure compliance with Airbus Helicopters Inc. policies, procedures and Federal Aviation Authority (FAA) and / or European Aviation Safety Agency (EASA) regulations as applicable. This role performs preliminary, hidden damage, in-process and final inspections; performs receiving inspections approving or rejecting incoming materials through established receiving inspection processes while recording quality inspection results; is required to work with inspection tools, aids and devices to resolve tolerances and specification limits; and is responsible for performing detailed inspections of parts, materials, paint, backshop activities, functional tests, operational test and dimensional inspections to of aircraft, systems and components to determine airworthiness.

Primary Responsibilities :

Inspection : 60%

\n

Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect / report suspected unapproved parts

\n

Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint

\n

Perform detailed inspections of manufactured components such dimensional checks and acoustic tap testing

\n

Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly.

\n

Resolve accurate shimming and joining of structures with rivets or other hardware in design drawings, engineering disposition, and other approved data

\n

Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing

\n

Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings

\n

Physically and systematically quarantine non-conforming components and assemblies identified during inspections

\n

Supervise the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle

\n

Perform stock inspections / purges when advised of possible non- conforming / suspected unapproved material

\n

Evaluate and disposition sales returns

\n

Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals

\n

Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub-assemblies

\n

Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components

\n

Inspect multiple airframe components to determine proper fit, form and function of the components

\n

Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data

\n

Qualify dynamic component parts applying visual inspection and precision measurement methods.

\n

Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications

\n

Ensure compliance with all applicable calendar / hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins

\n

Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43

\n \n

Documentation : 30%

\n

Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories

\n

Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness

\n

Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed

\n

Create NCM's for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution

\n

Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance)

\n

Process Goods Receipts during receiving of material

\n

Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures.

\n

Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and / or components

\n

Read and validate engineering drawings, reports, and test specifications

\n

Properly identify and document items in quality quarantine cage

\n

Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification

\n

Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems

\n \n

Quality Department Support / Continuous Improvement : 10%

\n

Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability

\n

Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion

\n

Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness

\n

Ensure compliance with company policies, procedures and FAA & EASA Regulations

\n

Support Company events, departmental meetings, special projects and team meetings

\n

Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met

\n \n

Additional Responsibilities :

Other duties as assigned at management discretion

\n

Qualified Experience and Training :

Education :

Required

High School Diploma or equivalent

\n

Preferred

Associates Degree or equivalent experience in Aviation or related industry

\n

Experience : Required

4 years of quality inspection on aircraft components and systems or 6 years as a certificated aviation maintenance technician (AMT) on aircraft components systems

\n

Preferred

Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector

\n

Licensure / Certifications :

Required

None

\n

Preferred

\n

Current / Valid FAA Airframe & Power Plant License

\n

FAA Inspection Authorization (IA)

\n

FCC 2nd Class License

\n

Non Destructive Inspection (NDI) Certificate

\n \n

Travel Required :

15 % Domestic and International

\n

Citizenship

US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)

\n

Clearance :

None

\n

Qualified Skills :

Knowledge, Skills, Demonstrated Capabilities :

Required

\n

Ability to interpret technical and regulatory documentation

\n

Ability to effectively communicate verbally and in writing with all levels of personnel

\n

Familiar with inspection tools, aids and devices used in determining tolerances and specification limits

\n

Have the experience and flexibility to work in multiple areas

\n \n

Communication Skills :

Required :

Ability to communicate effectively in verbal and written form in English

\n

Preferred :

Proficiency in French, German or Spanish

\n

Technical Systems Proficiency :

Required :

MS office or G Suite

\n

Preferred :

\n

Microsoft Office Suite (Excel, PowerPoint, Word and Access)

\n

Adobe Acrobat

\n

SAP

\n

Smartsheet

\n

G Suite

\n

OCE / ARAS / Bflow

\n

T.I.P.I

\n

Onbase

\n

Orion eTechPub

\n \n

Complexity of the Role :

Level of Decision Making :

Quality inspectors must routinely evaluate the airworthiness of aircraft and / or articles, serviceability of repairs, inspections, maintenance and safety of operation. This includes, but is not limited to, loss prevention of revenue, property or life. This position requires a high-degree of independent decision-making and integrity and may include making command decisions regarding safety of flight or operation of aircraft. Inspectors also routinely collaborate with managers, customers, suppliers, technicians, engineering and other departments for inspection related decisions.

\n

Organizational information :

Quality Inspector A's priorities will be established by the department management. This position will report to the Supervisor, Quality Assurance who will manage principal activity. This person will have the flexibility and background to fill in for various inspection vacancies as they occur.

Direct Reports :

Is this a people manager? No

# of Exempt Reports : 0

# of Non-exempt Reports : 0

Job Dimensions : \n

This position is directly responsible for ensuring the airworthiness and quality of each aircraft assigned to them, which has a direct impact on company profitability and risk prevention.

\n

Has direct contact with internal customers and suppliers during shipping / receiving inspection of aircraft kits and material

\n

Has the responsibility for generating / documenting of Non-conforming products, articles, and material when identified during routine inspections that supports and improves the overall quality of company products

\n

This position requires a professional individual who is knowledgeable, trustworthy, and personable with a customer and company advocacy mentality

\n \n

Nature of Contacts :

Moderate Communication on a frequent Basis with internal and external parties

\n

Physical Requirements :

\n

Onsite : 100% unless on business travel.

\n

Vision : able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable.

\n

Hearing : able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily.

\n

Speaking : able to speak in conversations and meetings, deliver information and participate in communications daily.

\n

Equipment Operation : able to operate most office and personal electronic equipment and some tools daily.

\n

Carrying : able to carry documents, tools, drawings, electronic equipment up to 30lbs / 14kgs daily.

\n

Lifting : able to lift documents, tools, drawings, electronic equipment up to 30lbs / 14kgs daily.

\n

Pushing / Pulling : able to push and pull small office furniture and some equipment and tools daily.

\n

Sitting : able to sit for long periods of time in meetings, working on computer several times a week.

\n

Squatting / Kneeling : able to squat or kneel to retrieve or replace items stored on low shelving. Daily

\n

Standing : able to stand for discussions in offices or on production floor daily.

\n

Travel : able to travel independently and at short notice 15% or less yearly.

\n

Walking : able to walk through office and production areas including uneven surfaces daily.

\n

Personal Protective Equipment required : Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators / Masks, and / or Protective Gloves as required by site and / or customer site

\n \n

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.

Company :

Airbus Helicopters, Inc.

Employment Type : Permanent

Experience Level : Professional

Remote Type : On-site

Job Family : Quality Inspection

Job Posting End Date : 10.10.2025

Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can term...